km-30-motor-2.png
km30s-asansor-kapi-kontrol-karti.png

KM-30S

Door Controller Card with Motor

Door Control Board for 220 VAC Synchronous Motor Telescopic Lift Doors

Input Supply Voltage
220 VAC ± %10
Motor Voltage
220 VAC
Feed Protection
Fuse Protected (2A)
Language Options
Turkish and English
Standard Interface
2 Rows, 16 Character LCD Screen, 4-Button Set, Optional External LCD Interface
Audible Warning
With the Buzzer
Dimensions (mm)
Without Box: 275 x 105 x 21 (Width x Height x Height) With Box: 310 x 112,6 x 30 (W x L x W)
Other
1 Spare Input

KM-30 S Card System Usage Advantages

Door Movements

Serious and Irregular

The advanced software softens the S in the navigation ramps and permits smooth but smooth movements of the door movements with no limit switch-free algorithm

Automatic Door Status Detection

No Limit Switch Required

The door operator does not need a limit switch for operation. Door width, door open-close positions are detected automatically

Possible Door Jam

When the door is jammed, the buzzer is turned back on. The jamming is passed slowly through the perceived zone to prevent damage to the passengers and the door

Access to the Menu

Delegation

In terms of security, necessary needs and ease of setup, access to the menu has been authorized. Different levels of authority have been assigned to access the menu: producer level, basic level and restricted level

Application Flexibility

Wide Parameter Capability

For manufacturers, parameters such as motor reduction ratio, engine revolutions, drive pulley circumference, spoon opening zone, etc. can be entered for application flexibility

User Settings

For user settings, defined speed settings in centimeters per second and defined ramp paths in centimeters can be specified

Door Operation Attachment

Counter Support

Operation of the door can be monitored by the on/off counter

Fully Integrated Operation

Various Output Signals

The door can be fully opened, completely closed, and can output jammed output signals to operate the control panels fully integrated

Keyboard

All system parameters can be adjusted using the KM-30S keypad

Door Motor Control

Reduction Option

220V BLDC control with or without door gear reducer

 


 

Other Features

 

Engine Type Max. 200W
Engine Output Power 0,65 A (Nominal)
Motor Control Shape Vector Control
Engine Protection Overloading and Short Circuit Protection
Encoder Type 3 Channel Incremental Encoder
Encoder Voltage 5 VDC
Resolution 100-2048 pals Model
Door Width 50 - 300 cm
Door Speed 20 cm/sn – 99 cm/sn
Door Speed (Slow) 5 cm/sn – 30 cm/sn
  • Door fully open / fully closed
  • Door jam or photocell active output
  • Relay contact output. For 3A, 250VAC or 30VDC
  • Door open / close signal
  • Slow signal / fast signal
  • Photocell signal
  • Ground signal
  • KM-30S door card is suitable for use on fire lift doors
  • With slow speed signal input, the photocell signal is blocked in long time photocell cutting and the doors are closed at slow speed (Nudging mode)
  • Door speed, door position and operating status in normal operation, and error in case of normal operation